USA Pond Products

What sets us apart from our competition?

We specialize in producing pond liners that are made-to-order in our factory in Ohio.

Upon placing an order with us, our Customer Service Team gets right to work processing your request.  They send your order directly to our Production Team who, in turn, pulls, cuts and welds together the required materials to produce your custom-built liner in around five days or less.  Many of our competitors rely on buying large master rolls from vendors (like us) and then simply roll out the length and cut it off and while timely, this limits your flexibility from getting the exact size you need.

We start every project with the end in mind.

Our liners are made from very flexible materials which allows our clients to build their pond with a shape, style and configuration to their own personal preference.  Following are the basic steps:

STEP 1 – OUTLINE YOUR INTENDED SHAPE

Using rope, tape, sand, etc. create the outside edge of your pond

TIP – Tight corners and intricate shapes should be avoided
PRO TIP – Position the pond to take advantage of the most appealing views

STEP 2 – EXCAVATION
Start digging inside the outline from step 1 down to your target depth
TIP – Create slopes or multiple tiers to add interest to your pond
PRO TIP – Excavated soil can be used to build up an area to be used for a waterfall

Step 3 – Underlayment

Once your pond is dug, you must remove any rocks, sticks, dirt clods or other sharp debris from the ground

TIP – A 2″ layer of sand or carpet remnants placed over the soil can protect the underside of your liner

PRO TIP – We sell an underlayment fabric that can be used in place of sand or carpet that will protect your liner

Step 4 – Liner Installation

Place the liner near your pond and carefully remove it from the shipping carton and starting in the center of the pond, spread it outward toward the outside taking time to fill any voids and remove as many wrinkles as possible
TIP – The liner should be large enough to lay on the top edge of your pond to the outside of your layout lines from step 1
PRO TIP – Be sure to have enough help to allow you to move the liner into position without having to drag it around which could cause damage

Step 5 – Securing Liner

The top of the liner must be weighed down to hold it in place. This can be done with soil excavated in step 2 or decorative rocks placed around the entire perimeter of the pond
TIP – If placing rocks around the top, be careful to not drop the rocks or drag them around as this can damage the liner
PRO TIP – Experienced pond installers will sometimes dig a small trench around the top of the pond and bury a portion of the liner in the trench to secure it in place.

Step 6 – Finish it off

Install a pump and filtration system and you are ready to go!
TIP – Wait to add your fish for several days after your pond is setup while running your equipment.
PRO TIP – Fish love plants plus adding waterfalls and fountains help with aeration of the water and also provide better aesthetics.

Frequently Asked Questions

  • Where are these liners made?
    All of our liners made in Ohio using raw materials purchased from USA and Canadian sources.
  • How long will it take to get my liner?
    We custom-make every liner we sell so it takes around five business days plus transportation time to receive a liner that you order from us.
  • Do you have any other material options?
    Yes, we offer liners in a variety of colors, thicknesses and polymers.
  • Do you offer other pond supplies?
    Currently, we remain focused on our pond liner products but we are adding new items all the time so please check back for updates.
  • Can I return my liner?
    All of our liners are made-to-order and therefore are unreturnable except for the unlikely event you have a warranty issue or shipping damage.
  • Does my liner have a warranty?
    Yes, we provide a 15-year limited warranty.  Below are the basics:

    • This is a limited, pro-rated warranty that is in effect for a period of 15 years starting from the date of purchase.
    • This limited warranty provides replacement liner price reduction on a pro-rated basis.
    • This limited warranty specifically excludes any additional claims for things such as:  water, labor, freight, etc.
    • This limited warranty does not include claims arising from improper handling, installation, maintenance, etc.
    • Punctures and tears are not covered by this limited warranty.

Already made a purchase?  Register below

Thank for visiting our site. Contact us today and find the best solution for whatever your need is.

  • Findlay Ohio USA
  • 419-424-5250